Japanese Heavy Cruiser Takao 1937–1946

The overall design philosophy of the Takao’s hull followed closely the concepts applied in the construction of her predecessors – the Myoko class cruisers. It featured modern lines, the result of extensive testing in the model basin. It measured 14.2 meters from keel to stem and 10.8 meters in the amidships section, with the height sloping down gently to 9.9 meters in the stern section. The hull’s length between perpendiculars was 192.5 meters, 201.7 meters along the design waterline and 203.8 meters overall. Maximum beam at anti-torpedo bulges was 19.0 meters while the ship’s draft was 6.57 meters. Armor protection was integrated into the hull’s structure and had a form of an armored box measuring 123.6 meters in length, which covered the forward and aft 203 mm ammunition magazines. The anti-torpedo bulges and armor protection were designed to withstand a point explosion of 200 kg of TNT. The Takao’s hull, including the armor, weighed in at 6 454 tons.,

The cruiser’s main battery consisted of five type E turrets, each mounting a pair of 203 mm/50 cal  main guns with maximum elevation of 70°, enough to use them in the AA role. The guns had the maximum range of 29 400 meters and the ceiling of about 10 000 m. The projectile’s weight was 130 kg and the weapon could fire two shots per minute. The ammunition stowage per gun was 100 rounds. Including the reserves, the cruiser carried 1 200 rounds of 203 mm main gun ammunition. The type E turrets were protected with 25 mm armor plates (front, sides and roof). The turrets also featured steel screens protecting them from the tropical heat. Similar screens were also used on enclosed fire control and rangefinder stations. The Takao was the first ship in the Imperial Japanese Navy to feature greatly improved and extended air conditioning and ventilation systems.
The ship’s medium artillery consisted of four 120 mm/45 cal guns mounted in single turrets with the maximum ceiling of 10 000 meters. Between 1932 and 1936 the ship carried light AA weapons consisting of two 40 mm Vickers and two 7.7 mm Lewis machine guns. After 1936 the Vickers guns were replaced with a pair of quad 13.2 mm Hotchkiss heavy machine guns mounted on the bridge tower.

Visualization 3D: Waldemar Góralski

The Takao carried four twin 610 mm Type 90 torpedo launchers. The revolving tubes were mounted on the main deck’s amidships section with armored boxes (50 mm Ducol steel casing) protecting the torpedoes’ warheads. The ship was equipped with two NO2 Model 3 Kure Shiki 2 Go Shashutsu 3 catapults (from 1932 to 1938) and a pair of reconnaissance Nakajima E42N Type 90-2 float planes.
The Takao’s machinery design power output was 130 000 SHP. The propulsion system included 12 oil burning boilers and four steam turbines driving four propellers with the diameter of 8 886 mm. The ship’s fuel capacity was 2 645 tons, which translated into a range of 8 000 nm at 14 knots.
As built, the ship’s complement was to be 727 officers and sailors (48+679), but as she entered service the Takao’s crew increased to 761.
The Takao’s bridge tower certainly deserves attention. The massive, complex structure was somewhat of a record-breaker in the field of naval architecture. The superstructure exemplified the desire of the Japanese shipbuilders to pack into their vessels the systems and weapons well above the standards used by other fleets. The Takao’s bridge tower was very close in size to the superstructure of the British King George V class battleships. The superstructure was based on the design of the Myoko class cruisers, but although it had almost the same height (31 meters from keel to the top of main rangefinder compared to Myoko’s 32 meters), its internal volume was almost twice the size of Myoko’s bridge tower. The ship’s designers attempted to squeeze as many combat stations as possible into the tower’s ten levels, which resulted in a complex maze of fire control, navigation and communication systems. Special care was taken in the design of the ship’s fire control systems (artillery and torpedoes) allowing day time and night time operations utilizing the superior Japanese optics. This design concept proved its value in the early stages of the war in the Pacific. The Japanese designers chose to build a huge superstructure believing that the centralization of key battle stations and command systems was worth the price of additional weight, drag or the potential large target area. Some of the combat stations in the bridge tower were doubled with their equivalents located on the aft superstructure, above the aircraft hangar.

Visualization 3D: Waldemar Góralski

After the Takao’s hull was launched at Yokosuka, a wooden mock-up of the upper section of the superstructure was built (equipped with the actual systems and all details of the battle stations) to test its overall functionality. The testing went on between June and December 1930, which shows how much thought went into the optimal arrangement of the various systems to be installed in the ship’s superstructure. However, when completed, the actual bridge tower differed significantly from its wooden prototype.
The total cost of construction of the four heavy cruisers was 113.48 million yen (28.37 million per cruiser). The unit cost was therefore just one tenth of the cost of construction of the battleship Yamato, which came with a price tag of 281.54 million yen.
The Takao’s service history
– April 28, 1927 – the ship is laid down at Yokosuka Keigun Kosho;
– May 12, 1930 – launch;
– May 31, 1932 – commissioning; August 1, 1932 – assigned to No. 1 Yobikan and begins crew work-ups;
– December 1, 1932 to December 15, 1935 – assigned to Sentai 4 Kantai 2;
– April 1933 – Sentai 4 joins Sentai 5 (Kako, Aoba, Kinugasa) for a joint exercise. Sentai 4 operates in Japan’s home waters and in the South Chine Sea;
– November 1935 – four Takao class cruisers are assigned to Yokosuka Kebi Sentai (coastal defense);
– October 1936 to July 1937 – Takao’s first refit;
– December 1, 1937 – Takao and Maya form the Sentai 4 of Kantai 2;
– Autumn of 1937 – after Chokai joins the team on August 7, Sentai 4 of Kantai 2 begins operations in the area around Ryojun (Port Arthur);
– November 15 – Takao and Atago are moved to the reserve prior to the main modernization at Yokosuka.


Read more…



  • Recommended Articles about Navy

  • Related Articles

The Japanese Cruiser Asama
The Japanese Cruiser Asama The victorious war against China in 1895 had a bittersweet...
SMS Torpedoboot A - III
SMS Torpedoboot A - III In the year 1894, Germany built the last small torpedo boat in...
Battleships Scharnhorst and Gneisenau vol. I
Battleships Scharnhorst and Gneisenau vol. I The Kriegsmarine battleships, in fact, were only four vessels...
The Soviet Skoryi Class Destroyer
The Soviet Skoryi Class Destroyer The „Smelyi” type destroyer, Project 30 bis (Skoryi class,...
The American Destroyer USS Fletcher 1942
The American Destroyer USS Fletcher 1942 When, in the early 1930s, the Americans began modernizing their...